03-04
For microporous polishing such as nozzle, diamond abrasive with the smallest particle size needs to be selected. The reason is that the smaller the particle size is, the higher the polishing accuracy i…
MORE >
03-04
(1) Main transmission part: after long-term use of the loom, the oil seal of the crankshaft bearing seat of the driving part needs to be replaced.(2) Opening part: it is necessary to replace the cam op…
MORE >03-04
In the energy-saving measures, in addition to the use of multiple air reservoirs and precision solenoid valve control, the use of various energy-saving and durable auxiliary nozzles has become one of t…
MORE >03-04
The common raw materials of ceramic nozzle materials include oxides, carbides, borides, nitrides and additives. It is made by powder metallurgy process (mainly hot pressing sintering) after mixing vari…
MORE >03-04
The head of auxiliary nozzle of air-jet loom is made by calendering process.The most commonly used auxiliary nozzle is made of stainless steel. The stainless steel plate is heated, then calendered and …
MORE >03-03
The position of the spray hole on the auxiliary nozzle is usually slightly concave, which can prevent the hair head of the spray hole from piercing or scraping the warp yarn. The included angle between…
MORE >03-03
The orifice of auxiliary nozzle can be roughly divided into single hole type and multi hole type. The diameter of the round hole of the single hole auxiliary nozzle is about 1.5mm, and the pore diamete…
MORE >03-03
In order to realize wide width and high speed on air-jet loom, relay weft insertion must be adopted, and high-speed air flow must be supplemented by auxiliary nozzle to maintain the traction of air flo…
MORE >
